Aris Industries

Seco developed its new thread chaser insert holder to bring high levels of precision and rigidity to threading operations that involve tough materials including the hard, gummy or high-chrome content ones used in the oil and gas industry. Such achievement is possible via a special carbide-pin locating system combined with a patented pocket seat surface pattern and high-pressure coolant capabilities.

Working in unison with top and axial clamps, the holder’s locating system uses two horizontally oriented pins that rest at specific distances from the bottom of the insert pocket. The exact points on the insert where these pins make contact are the same points that Seco works with when grinding the insert’s threading profile.

The two-pin system ensures extremely precise insert positioning from insert to insert as well as plays a key role in the holder’s increased rigidity and insert support. As a result, the holder helps reduce the number of threading passes required to produce a full thread profile.

The holder’s pocket seat surface pattern features milled scallops that provide even more chaser insert support. When the insert is mounted in the pocket, the clamping force acts on the scallop pattern and work hardens the seat surface to a hardness of 54HRc.

Seco also equipped the holder with high-pressure coolant directed at key cutting areas of the insert. Coolant enters the holder from the back end, travels through the insert cavity directly to the insert’s chipformer and into the channels between each tooth. With a maximum output of 3,046 psi (210 bar), the holder delivers the industry’s highest coolant pressures for thread chasing operations.

The new thread chaser holder comes in two versions, P1 for 625″ (15.875 mm) thick inserts and P5 for .984″ (25 mm thick) inserts. Chipformer sizes come in .156″ (3.97 mm) and .124″ (3.18 mm).

For more information on the new thread chaser holder, please visit:
www.secotools.com/threading

About Seco Tools, LLC:
Seco Tools, LLC is a leading provider of metalcutting solutions for milling, turning, holemaking and toolholding. The company prides itself on building close relationships with customers to effectively understand and address their needs.

For more information on the company’s products and services, please visit:
www.secotools.com/us

Or contact:
Bob Heery: bob.heery@secotools.com
Tel: 248.528.5451
Seco Tools, LLC
2805 Bellingham Drive  •  Troy, Michigan

Stay Connected:

Seco developed its new thread chaser insert holder to bring high levels of precision and rigidity to threading operations that involve tough materials including the hard, gummy or high-chrome content ones used in the oil and gas industry. Such achievement is possible via a special carbide-pin locating system combined with a patented pocket seat surface pattern and high-pressure coolant capabilities.

Working in unison with top and axial clamps, the holder’s locating system uses two horizontally oriented pins that rest at specific distances from the bottom of the insert pocket. The exact points on the insert where these pins make contact are the same points that Seco works with when grinding the insert’s threading profile.

The two-pin system ensures extremely precise insert positioning from insert to insert as well as plays a key role in the holder’s increased rigidity and insert support. As a result, the holder helps reduce the number of threading passes required to produce a full thread profile.

The holder’s pocket seat surface pattern features milled scallops that provide even more chaser insert support. When the insert is mounted in the pocket, the clamping force acts on the scallop pattern and work hardens the seat surface to a hardness of 54HRc.

Seco also equipped the holder with high-pressure coolant directed at key cutting areas of the insert. Coolant enters the holder from the back end, travels through the insert cavity directly to the insert’s chipformer and into the channels between each tooth. With a maximum output of 3,046 psi (210 bar), the holder delivers the industry’s highest coolant pressures for thread chasing operations.

The new thread chaser holder comes in two versions, P1 for 625″ (15.875 mm) thick inserts and P5 for .984″ (25 mm thick) inserts. Chipformer sizes come in .156″ (3.97 mm) and .124″ (3.18 mm).

For more information on the new thread chaser holder, please visit:
www.secotools.com/threading

About Seco Tools, LLC:
Seco Tools, LLC is a leading provider of metalcutting solutions for milling, turning, holemaking and toolholding. The company prides itself on building close relationships with customers to effectively understand and address their needs.

For more information on the company’s products and services, please visit:
www.secotools.com/us

Or contact:
Bob Heery: bob.heery@secotools.com
Tel: 248.528.5451
Seco Tools, LLC
2805 Bellingham Drive  •  Troy, Michigan

Stay Connected:

Big Ass Fans unveiled today a new LED attachment for the Powerfoil®X2.0 industrial ceiling fan.

The sleek LED fixture produces up to 20,700 lumens, equal to the light output of 25 60-watt incandescent bulbs. For spaces that require less light, there are 9,050-lumen and 14,500-lumen configurations also available.

The standard color temperature of 5700K is similar to daylight and ideal for the detailed work done in factories, warehouses, auto shops and more. The angle of light distribution can be easily optimized with customizable lenses, from 30° for direct light in narrow spaces to 100° diffused for large, open areas.

The new fixture seamlessly integrates with existing lighting grids and operates on any voltage between 120 and 277. (Special voltages are available on request.) With a rated life of 100,000 hours, the Powerfoil X LED is designed to require no maintenance and backed by a 5-year, full-performance warranty.

Big Ass Fans’ most powerful industrial fan is now also the brightest. The new Powerfoil X LED provides unimpeded light wherever facility managers and building occupants need it.

For more information, please visit:
www.bigassfans.com

or call:
877-244-3267

Stay Connected:

TRUMPF is pleased to announce that the TRUMPF Inc. training center in Farmington, CT, has been approved by the State Approving Agency (SAA) of the Connecticut Office of Higher Education to train eligible Veterans Affairs (VA) educational beneficiaries. The official certification was granted on October 28, 2015.

The SAA approval stems from a rigorous application process followed by a

site survey of TRUMPF’s training facilities. With this certification, TRUMPF’s training center becomes the first and only center in the machine tool industry that is both IACET certified and certified by the SAA to train eligible veterans. Since tuition is now covered by the VA education assistance program, veterans now have the opportunity to enroll in TRUMPF training courses and earn CEUs at no cost to them.

“We are overjoyed to have achieved SAA approval for TRUMPF training and for the opportunity to better support eligible veterans looking to further their skills in machine programming, operation, and maintenance,” asserts Christine Benz, training manager at TRUMPF Inc. “This certification further demonstrates TRUMPF’s commitment to providing high-quality training that adheres to the highest standards of adult education.”

Please visit TRUMPF Inc.’s training webpage, www.mytrumpf.com/us_training/ for more information on courses offered.

About TRUMPF:
TRUMPF is the world market and technology leader in fabricating machinery and industrial lasers for flexible sheet metal processing. Products manufactured with the company’s technology can be found in almost every sector of industry. TRUMPF Inc. is the largest subsidiary of the TRUMPF Group and is dedicated to serving the U.S., Canadian and Mexican markets.

For more information, please visit:
www.us.trumpf.com 

Stay Connected:

TRUMPF is pleased to announce that the TRUMPF Inc. training center in Farmington, CT, has been approved by the State Approving Agency (SAA) of the Connecticut Office of Higher Education to train eligible Veterans Affairs (VA) educational beneficiaries. The official certification was granted on October 28, 2015.

The SAA approval stems from a rigorous application process followed by a

site survey of TRUMPF’s training facilities. With this certification, TRUMPF’s training center becomes the first and only center in the machine tool industry that is both IACET certified and certified by the SAA to train eligible veterans. Since tuition is now covered by the VA education assistance program, veterans now have the opportunity to enroll in TRUMPF training courses and earn CEUs at no cost to them.

“We are overjoyed to have achieved SAA approval for TRUMPF training and for the opportunity to better support eligible veterans looking to further their skills in machine programming, operation, and maintenance,” asserts Christine Benz, training manager at TRUMPF Inc. “This certification further demonstrates TRUMPF’s commitment to providing high-quality training that adheres to the highest standards of adult education.”

Please visit TRUMPF Inc.’s training webpage, www.mytrumpf.com/us_training/ for more information on courses offered.

About TRUMPF:
TRUMPF is the world market and technology leader in fabricating machinery and industrial lasers for flexible sheet metal processing. Products manufactured with the company’s technology can be found in almost every sector of industry. TRUMPF Inc. is the largest subsidiary of the TRUMPF Group and is dedicated to serving the U.S., Canadian and Mexican markets.

For more information, please visit:
www.us.trumpf.com 

Stay Connected: